SOVEREIGN PRO 10-300
SOVEREIGN PRO 10-300
10 Inch Loudspeaker Drivers - BASS DRIVER
SOVEREIGN PRO 10-300
Cam kết chất lượng
Cam kết dịch vụ
Cam kết giá tốt
The Sovereign Pro 10-300 is intended for use in two-way ported enclosures such as the classic bass driver plus horn tweeter or compression driver format. The unit features die cast chassis with long throw motor system and high linearity suspension allowing solid bass reproduction at high-power levels. This driver delivers a smooth and balanced response throughout its frequency range and delivers well balanced tonal characteristics when properly matched to appropriate high-frequency drivers. The Sovereign Pro 10-300 is designed for use in 14 to 40 Litre ported enclosures and features a 2.5 inch sandwich voice coil capable of 300 Watt power handling and 98 dB sensitivity.
| Electro Acoustic Specifications | |
|---|---|
| Nominal Chassis Diameter | 10" / 254 mm |
| Impedance | 4 /8 /16 Ω |
| Power Handling | 300 W (A.E.S.) |
| Peak Power (6dB Crest Factor) | 1200 W (A.E.S.) |
| Usable Frequency Range (-6dB) | 45 Hz - 4 kHz |
| Sensitivity (1W - 1m) Wideband | 98 dB |
| Moving Mass (inc. Air Load) | 37 grams |
| Minimum Impedance (Zmin) | 6.8 Ω |
| Effective Piston Diameter | 8.46" / 214.88 mm |
| Magnet Weight | 56 oz |
| Magnetic Gap Depth | 0.39" / 10 mm |
| Flux Density | 1.1 Tesla |
| Coil Winding Height | 0.70" / 18 mm |
| Voice Coil Diameter | 2.5" / 63.5 mm |
| Speaker Type | Bass Driver |
| Speaker Series | The Professional Series |
| Program Power | 600 W (A.E.S.) |
| Sensitivity (1W / 1m) Working band | |
| Thiele Small Parameters (TSPs) | |
| FS | 58 Hz |
| Re | 5.7 Ω |
| QMS | 6.08 |
| QES | 0.34 |
| QTS | 0.32 |
| Vas | 41 litres |
| Vd | 0.208 litres |
| CMS | 0.211 mm/N |
| BL | 15.3 T/m |
| MMS | 37 grams |
| Xmax | 5.5 mm |
| Sd | 378 cm2 |
| Efficiency | 2.36% |
| Le | 1.68 mH |
| EBP | 170.59 Hz |
| Materials of Construction | |
|---|---|
| Coil Former Material | Glass Fibre |
| Voice Coil Material | Copper - Inside / Outside Windings |
| Magnet Material | Ferrite |
| Chassis Material | Die-cast Aluminium |
| Cone Material | Curvilinear Paper |
| Surround / Edge Termination | Polyvinyl Damped Dbl. Half Roll Linen |
| Dust Dome Material | Solid Paper |
| Connectors | Push-button Spring Terminals |
| Polarity | Positive voltage at red terminal causes forward motion of cone |
| Mounting / Shipping Information | |
| Overall Diameter | 11.16" / 283.4 mm |
| Width Across Flats | 10.34" / 262.7 mm |
| Flange Height | 0.305" / 7.8 mm |
| Baffle Hole Diameter F/M | 8.97" / 227.83 mm |
| Baffle Hole Diameter R/M | N/A |
| Gasket Supplied | Rear |
| Outer Fixing Holes | 4x ø 0.218" on 10.625" PCD / 4x ø 5.5 mm on 270 mm PCD |
| Inner Fixing Holes | Not Applicable |
| Depth | 4.37" / 111 mm |
| Weight | 11.02 lb / 5 Kg |
| Recommended Enclosure Volume | 0.49 - 1.41 cu ft / 14 - 40 Litres |
| Shipping Weight | 12.56 lb / 5.7 Kg |
| Packing Carton Dimensions | (W) 275 (D) 275 (H) 150 mm |
`
-----------
Mọi chi tiết về tư vấn thiết kế lắp đặt âm thanh - ánh sáng Karaoke, Bar Club, Pub, Phòng Trà, Cafe Acoustic, Hội Trường xin liên hệ AV Việt Nam quý khách hàng có thể liên hệ theo:
CÔNG TY CỔ PHẦN ĐẦU TƯ AV VIỆT NAM
Website chính thức: https://www.avv.vn
Showroom: 6/45 Bùi Huy Bích, Thịnh Liệt, Hoàng Mai, Hà Nội
Hotline: 0962.360.055
Email: infoavv.vn@gmail.com
Fanpage chính thức: www.fb.me/avvietnamcorp
Hoặc đến trải nghiệm sản phẩm trực tiếp tại các Showroom của AV Việt Nam trên toàn quốc.
